Bifold door showing one screen still retracted. Note one half can be left open by use of the optional tower bolts.

Bifold doors showing both screens fully extended, held together in the centre by the magnetic strips.

Patio sliding door with screen fully retracted into the housing on the right hand side of the door opening

Patio door showing the screen fully extended

A Phantom screen to be fitted to a left hand open in casement door.

Component and colour check prior to start of installation.

Fitting frame spacers/packers, this allows the sliding screen to clear existing door frame extrusion profiles.

The Main housing of the screen has been attached over the top of the spacers on the hinged side of door frame.

Top and bottom guide rails fitted, these rails guide the screen as it travels across the face of the door frame.

Checking top and bottom guide rails for parallel, this is very important for correct door operation.

Screen buffers, these are used to prevent the screen handle from contacting the main housing when the screen is retracted.

Screen fully extended. The screen is held in this position by a positive full height double magnetic strip